0.37kW

⭐️FEATURES⭐️
- AISI304 motor shell , upper cover, strainer , shaft and nuts 
- Italian double face mechanical seal, AC over-heat protector inside 
- Integrated plug , good water proof , energy saving , big flow 
- Good appearance , small and light , easy to use and maintain

⭐️SPECIFICATIONS⭐️
- Model : MSS370 /

⭐️FEATURES⭐️
- Best structure design 
- Dry motor 
- Double mechanical seals 
- Equipped with Auto-cut protector 
- Pump casting 
- Out cover adopt stainless steel material 
- Acid resisting silicon cabide seals 
- This series is suitable for all light acid , corrosive 

⭐FEATURES⭐  - Built-in thermal protector  - AISI 304 fabricated shaft, handle, pump body  - Automatic start and stop with float switch  - Insulation class : F    ⭐SPECIFICATIONS⭐ - Brand : LEO  - Model : LSWM50A  - Voltage : 220V  - Max Flow (L/min) : 217 - Max Head (M) : 11 - Power : 0.37kW / 0.

⭐️𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒⭐️  - Stainless steel 304 pump body which is clean and longer life. - High efficiency and energy saving, safe and reliable. - Durable - Compact Structure  - Easy installation    ⭐️𝐒𝐏𝐄𝐂𝐈𝐅𝐈𝐂𝐀𝐓𝐈𝐎𝐍𝐒⭐️ - Brand : SHIMGE  - Model : JET370G2 PC / JET370G2 + PS-01 - Voltage : 240V  - Power : 0.37kW  - Hose Power : 0.

⭐️𝐏𝐑𝐎𝐃𝐔𝐂𝐓 𝐃𝐄𝐒𝐂𝐑𝐈𝐏𝐓𝐈𝐎𝐍𝐒⭐️ - A PZ series product can achieve water supply at steady pressure and provide steady water pressure for users.  - A thermal protector is installed on the pump body to detect the temperature of the pump body, when th water pump runs without water or the temperature of the medium is too high, the water pump will stop running.

⭐️𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒⭐️  - Transfer of clean water or other liquids similar to water in physical and chemical properties  - Domestic water supply - Pressure boosting for high buildings  - Garden and agriculture irrigation  - Industrial use  - Copper winding  - Built-in thermal protector  - Anti-rust treatment for moistened part  -

⭐️FEATURES⭐️ - Thermal protector : single phase  - Insulation : F - Protection : IP55 - Cold & Hot water   ⭐️SPECIFICATIONS⭐️  - Brand : Tsunami Pump  - Model : BJA-370  - Power (kw) : 0.37  - Horse Power (HP) : 0.5  - Voltage /Frequency : 240V / 50Hz  - Max Flow (m³/hr) : 2.

⭐️𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒⭐️ - Low Maintenance - Energy Saving  - Over Heating Protection  - Anti-Rust Pump shell - Less noise operation  - Strong and durable   ⭐️𝐒𝐏𝐄𝐂𝐈𝐅𝐈𝐂𝐀𝐓𝐈𝐎𝐍𝐒⭐️ - Brand : Tsunami Pump - Model : CMH2-30IPT - kW/Hp: 0.37kW/ 0.

⭐️SPECIFICATIONS⭐️ - Model : JDR-520B  - Power (kW/V/Hz) : 0.37/230/50 - Roller (cm) : 52 - Thickness (cm) : 0.1-3.

⭐️SPECIFICATIONS⭐️
- Brand : Fresh
- Model : MT-25T
- Power (kW/V/Hz) : 0.37/230/50
- Roller (cm) : 21 x ø6
- Productivity (kg/h) : 12 - 25
- Knife Width (mm) : 1.5/2mm
- Thickness (mm) : 0.5 -7mm

⭕️ Note : 
- Take at least 10 minutes break after 30 minutes running the machine.

⭐️SPECIFICATIONS⭐️ - Power (kW/V/Hz) : 0.37/230/50 - Roller (cm): 30 - Thickness (cm): 0.1-0.

⭐FEATURES⭐
- Dry-Running Protection
- Anti Bursting
- Digital Indicator
- Adjustable Cut in/Cut off setting
- Maintenance Free
- Reduce Hammering
- Restart System (Dry Run)
- Old House/Piping(>15yrs)
- ABS Piping 

⭐SPECIFICATION⭐
- Brand : Tsunami Pump
- Model : CMS2-30iPT
-

⭐FEATURES⭐
- Dry-Running Protection
- Anti Bursting
- Digital Indicator
- Adjusttable Cut in / Cut off setting
- Count Down Setting
- Maintenance Free
- Restart System (Dry Run)
- Old House / Piping
- ABS Piping

⭐SPECIFICATION⭐
- Model : CMS2-30IPC
- Horsepower : 0.

Model: MT-25IIB
Power (kW): 0.

General Descriptions

• Clean water without abrasive particles, non-aggressive liquid.
• Perfect for domestic use.
• In particular for delivering water in combination with small pressure sets and for irrigation.
• Installed in enclosed places, or at least protected against inclement weather.

⭐️𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒⭐️ - Low Maintenance  - Anti-Rust Pump Shell - Over Heating Protection - Energy Saving  - Less Noise Operation - Strong & Durable   ⭐️𝐌𝐎𝐓𝐎𝐑⭐️ - 2 Pole induction motor  - Three-phase 380-415V / 50Hz - Single phase : 220~240V / 50Hz - Single Phase with input thermal protector - Insulation Class : F  -