Car Workshop Equipment

• Two cylinder design for easy to fix the tension pulley, adjustment by the 1/4' wrench.

• For removal distributor pin

• Special socket for removing oxygen sensor
  

• 22mm OXYGEN SENSOR SOCKET This is a Special 12 Point.

⭐️FEATURES⭐️ - To remove stubborn pin from gear box when replacing the oil seal - Designed to remove the pin from the gearbox easily - For installation and removal of gear box pin  - 3pcs pin 4.7mm x 28mm - 4.7mm x 40mm - 4.

•  The related adapters are suitable for japanese system of cars.

• Air gauge with quick coupling & release valve.

• Easy-reading 2-1/2″ diameter gauge features color-coded quadruple calibrations with

⭐️PRODUCT DESCRIPTIONS⭐️ - Valve lapping is basically polishing down the surface of the valves (which allow fuel and air to flow in, and exhaust to flow out) and the valve and valve seat make contact with each other   ⭐️FEATURES⭐️ - For hand lapping valves and valve seats.

⭐️𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒⭐️ - Each tool include an idle adjustment screwdriver within a socket with window and a different handle for holding adjustment screw in place - The socket window is always visible when handle pivots from one side to the other.  - So you can see the position of the screwdriver blade holding the adjustment screw while the jam nut is tightened.

•  Overhead camshaft engines using spacer shims.

• Overhead camshaft engines using spacer shims

• Using the camshaft central screw and fit in the socket to be the support to fix the

• Precision machined seal driving adapters guide the seal for proper setting

• Designed to reach into confined area for removal of valve seal

• For use on a wide range of OHV, OHC and CHV engines

⭐️FEATURES⭐️ - Used for car & motorcycle - 5pcs pusher for fitting the valve spring correctly and easier to compress the valve spring easily   ⭐️SPECIFICATIONS⭐️ - Brand : SB tools  - Model : VSC6109 - Pusher size : 16mm, 19mm, 23mm, 25mm & 30mm

• For use on most foreign & domestic engine including : Audi, Nissan, Toyota, Chrysler,

• Designed to compress valve springs on overhead valve engines with the cylinder removed.

• Suitable for use on multi-valve petrol & diesel engines with deep seated valves.

FEATURES⭐️
- Fully adjustable telescopic boom with chain and hook 
- Convenient handle helps in maneuvering hoist into position 
- Low profile design for low ground clearance vehicles 
- Six swivel caster wheels for easy maneuverability and hoist positioning 
- 2 ton hydraulic jack larger diameter ram to withstand side

⭐️FEATURES⭐️
- Proper Heat treated 
- Pivoting through 180 
- Special CR-V material with toughness and reliability 
- Internal sakura pattern design which saving applied strength by 15% 
- Good quality
- Tools for tightening bolts , nuts or other hard to turn items 
- Matt finish on the surface with raised

⭐FEATURES⭐
- Standard 14 OZ simple package oil,sealed oil tank 
- 400 CC bulk oil
- High strength pressure zinc alloy die cast head
- Comfortable plastic rubber handle design
- Max.

⭐FEATUERS⭐
- High strength pressure zinc alloy steel cast tip 
- High strength heat-treated spring to ensure the pressure lasting and balance.Speicail self-lock device for more safety and convenience
- Special design to add a steel ball inside to ensure the oil does not reflow.