water pump

⭐️DESCRIPTIONS⭐️ - PM series multi-stage centrifugal permanent magnet variable frequency pump head is made of thickened stainless steel , which is acid and alkali resistant and corrosion-resistant, effectively preventing rust water and healthy water.  - When the water is stopped , the microcom-puter control system will automatically detect and control the motor to slow down.

⭐️SPECIFICATIONS⭐️
- Displacement : 212CC / 7HP 
- Power : 5.

⭐️FEATURES⭐️
- Max liquid temperature +85°
- AISI 304 fabricated shaft 
- Built in thermal protector 
- Insulation Class : F 
- Protection Class : IP44 

⭐️SPECIFICATIONS⭐️
- Model : ECHM2-50
- Voltage : 220V 
- Flow rate : 10-60L/min 
- Max Head : 40-19M 
- Power

⭐️FEATURES⭐️
- Max liquid temperature +85°
- AISI 304 fabricated shaft 
- Built in thermal protector 
- Insulation Class : F 
- Protection Class : IP44 

⭐️SPECIFICATIONS⭐️
- Model : ECHM2-40 
- Voltage : 220V 
- Flow rate : 10-60L/min 
- Max Head : 33-16M 
-

⭐️FEATURES⭐️
- High efficiency 
- Italy Technology
- Auto thermal protector 
 
⭐️SPECIFICATIONS⭐️
▪️ JDP4500
- Power : 450W
- Voltage : 240V / 50Hz
- Motor : Copper 
- Rotate Speed : 2850RPM 
- Max Flow rate : 12,500L/H
- Max Head / Lift Height : 7 Meters 
- Max

⭐️FEATURES⭐️
- High efficiency 
- Italy Technology
- Auto thermal protector 
 
⭐️SPECIFICATIONS⭐️
▪️ JCP3000
- Power : 300W
- Voltage : 240V / 50Hz
- Motor : Copper 
- Rotate Speed : 2850RPM 
- Max Flow rate : 7300L/H
- Max Head / Lift Height : 7.

⭐️SPECIFICATIONS⭐️
- Model : KSQ0750A / KSQ-750M
- Power : 750W 
- Voltage : 240V ~ 50Hz
- Max Flow Rate : 300L/min 
- Max Head : 12.

⭐️SPECIFICATIONS⭐️
- Brand : KAMU Pro 
- Model : 50KSQ16-1.

⭐️DESCRIPTIONS⭐️
- It is designed to drain clean or slightly dirty water from any enclosed environment, such as cellars, reservoirs, flooded basements.
- The submersible pump with bottom suction design allows to remove water down to 5mm of surface and pass up to 2-3mm grains.

⭐FEATURES⭐  - Built-in thermal protector  - AISI 304 fabricated shaft, handle, pump body  - Automatic start and stop with float switch  - Insulation class : F    ⭐SPECIFICATIONS⭐ - Brand : LEO  - Model : LSWM200CA  - Voltage : 220V  - Max Flow (L/min) : 500 - Max Head (M) : 17 - Power : 1.5kW / 2.

⭐️𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒⭐️ ▪️ ABS original particles  - ABS original pellet injection molding sturdy and durable    ▪️ Energy Efficiency  - 200W Power, 4.

⭐️𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒⭐️ ▪️ ABS original particles  - ABS original pellet injection molding sturdy and durable    ▪️ Energy Efficiency  - 50W Power, 2.

⭐️𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒⭐️ ▪️ ABS original particles  - ABS original pellet injection molding sturdy and durable    ▪️ Energy Efficiency  - 10W Power, 1.

⭐️𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒⭐️ ▪️ ABS original particles - ABS original pellet injection molding sturdy and durable    ▪️ Ceramic Bearing is durable  - Abrasion-resistant, rust resistant, dual use in fresh water   ▪️ Filter cover  - Prevent debris small fish strated in    ⭐️𝐒𝐏𝐄𝐂𝐈𝐅𝐈𝐂𝐀𝐓𝐈𝐎𝐍𝐒⭐️ - Brand : Hailea - Model : L-20 - Power :

⭐️𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒⭐️ ▪️ ABS Original Particles  - ABS original pellet injection molding sturdy and durable    ▪️ Energy Efficiency  - 240W power, 6.

⭐️𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒⭐️ ▪️ ABS Original Particles  - ABS original pellet injection molding sturdy and durable    ▪️ Energy Efficiency  - 150W power, 4.

⭐️𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒⭐️  - Non-clogging impeller minimizes abrasives wear and allows large solid passage  - Dry motor with overload protector  - Cable with an exposy resin sealed waterproof cable hood - Use deep groove C3 bearing to extend life time  - Superior abrasion resistant double mechanical seal to ensure best seal effect  - Oil seal mounted

⭐️𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒⭐️ - Noise reduction upgrade - High speed permanent magnet  - CE certification  - Cold and hot general  - Water shortage protection  - Efficiency and energy saving  - 🌡𝟏𝟎𝟎°𝐂 𝐇𝐎𝐓 water is 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐁𝐋𝐄!   ⭐️𝐒𝐏𝐄𝐂𝐈𝐅𝐈𝐂𝐀𝐓𝐈𝐎𝐍𝐒⭐️  - Brand : O'rties  - Model : 400/ZPZ/A/H34-Q2.

⭐️FEATURES⭐️  - Leakage reminder - Constant pressure water control  - High temperature protection  - Antifreeze function  - Water Shortage protection  - Low noise and quiet - Variable frequency constant voltage, low energy consumption  - Energy saving and power saving, excellent and

⭐️FEATURES⭐️ - Built in thermal protector  - Engineering plastic pump body  - AISI 304 fabricated shaft  - Insulation class : B  - Protection Class : IPX5   ⭐️TECHNICAL DETAILS⭐️  - Brand : LEO  - Model : XKP-1604E - Voltage : 220V  - Flow : 25 - 450L/min  - Head : 17.1-3.6M - Max Suct : 3.

⭐️FEATURES⭐️ - Built in thermal protector  - Engineering plastic pump body  - AISI 304 fabricated shaft  - Insulation class : B  - Protection Class : IPX5   ⭐️TECHNICAL DETAILS⭐️  - Brand : LEO  - Model : XKP-350-2 - Voltage : 220V  - Flow : 12.5 - 125L/min  - Head : 9-2M - Max Suct : 3.

⭐️FEATURES⭐️  - Perfect water Pressure  - Intelligent variable Speed - Permanent magnet motor  - User Friendly  - Protective function  - Energy and space saving  - Low noise - Ambient max temperature +50°C  - Liquid max temperature : +40°C  - Liquid PH value : 6.5 ~ 8.

⭐️FEATURES⭐️  - Thermal Protector : Single Phase  - Insulation : F - Protection : IP55 - Cold & hot water  - Low Maintenance - Energy Saving  - Over heating protection - Anti-Rust Pump Shell  - Strong & Durable  - Less Noise operation   ⭐️SPECIFICATIONS⭐️  - Brand : Tsunami Pump  - Model :